Call us: +2711 516 9400

pbProduction, a division of PBSA PitneyBowes SA A Division of PBSA

Paper Cutters and Guillotines

Paper cutters and guillotines allow you to cut large quantities of paper ranging from 40 to 1 100 sheets of paper in a range of diverse shapes and sizes. From business card slitters, foam board trimmers and precision cutters, all your paper cutting needs are catered for

BAUM Cutters are known for low maintenance and hours of operation. With many exclusive features, our cutters are designed with great safety features. Contact us with your requirements and we will contact you within 24 hours with the most suitable solution to meet your needs.

BAUM Cut 22E Programmable Efficiency Cutter

PBSA pbProduction BAUM Cut 22E Programmable Efficiency Cutter

Programmable cutter with hydraulic clamp and knife drive.

  • Overview

    The BAUM Cut 22E is a robust, programmable cutter with hydraulic clamp and knife drive, and a 5.5″ monochrome display.

    The ultra-smooth stainless table surface allows an easy handling of the material, even without air jets. The clamping pressure can be adjusted infinitely within a wide setting range by means of an adjusting knob on the front of the cutter. Bright LEDs mark the cutting line, clealy visible for the operator.

    Operation of the Baumcut 22E is done via an ergonomically positioned 5.5″ monochrome display and additional membrane keypad. Recurring cutting sequences can be memorised, with a memory capacity of 198 programs, which can be adapted at any time.

    Creation of the cutting programs is done either manually or menu-driven, and intuitively via block programming. To optimise the cutting quality the pre-clamping time can be adjusted according to the material.

  • Features

    198 programs for storing separate jobs

    6464 total cut step memory

    Automatic and manual cutting modes

    999 maximum cut steps per program

    Records total number of lifetime cuts

    Records total number of knife changes

    Adjustable clamping time for extra air escape

    Adjustable knife resting time

    Block programming

    Jogging mark notation in cutting programs

    LCD readout display

    Membrane touch panel keypad

    Can enter and divide fractions into decimals

    Push-out programming steps

    Program protection

    Pop-up window for maintenance reminder

  • Download

BAUM Cut 22N Network Integrated Cutter

PBSA pbProduction BAUM Cut 22N Network Integrated Cutter

Hole punch machine that can hold up to 80 sheets at a time.

  • Overview

    The BAUM Cut 22N is a sturdy, programmable cutter for integration into the digital workflow. It has an 18.5″ touch screen display, barcode reader, Compucut® and process visualisation.

    Barcode reading for automatic cutting program creation and loading of the assigned program via the Compucut® feature is all new. Minimal maintenance is required for the BaumCut 22N due to the use of novel materials.

    The ultra-smooth stainless table surface allows an easy handling of the material, even without air jets. The clamping pressure can be adjusted infinitely within a wide setting range for each material cut. Bright LEDs mark the cutting line, making it clearly visible for the operator.

    Operation of the BaumCut 22N is done via an ergonomically positioned 18..5″ touch-screen display. Recurring cutting sequences can be memorised, with a memory capacity of 1 998 programs. With the process visualisation the handling of the material is displayed graphically and so the risk of errors is significantly downsized

  • Features

    Maximum cutting width 22.05 inches (560mm)

    Backgauge speed on return: 2.76 in/sec (7 cm/sec)

    Knife Speed: 20 cycles/min

    Clamp pressure min.: 397 lbs. (180 daN)

    Clamp pressure max.: 2 646 lbs. (1200 daN)

    Electrics: 220/1/60 or 220/1/50

    Infrared safety beams are standard

    Two-hand, timed cut release with non-repeat device

    Rear table fully covered

  • Download

BAUM Cut 26.4E Programmable Cutter

PBSA pbProduction BAUM Cut 26.4E Programmable Cutter

Compact, and easy to operate, with minimal maintenance.

  • Overview

    The BAUM Cut 26.4 programmable cutter is efficient, compact, and easy to operate, with minimal maintenance. This heavy-duty, fully-hydraulic cutter features easy push-button programming and stores up to 99 programs with 6464 cut steps.

    The Baumcut 26.4 offers high-productivity precision cutting with maximum safety in mind. Infrared safety beams, two hand timed cut release and covered rear table help ensure operator safety. Noise levels are kept to a minimum since the motor runs only during cutting operations.

    Programming is automatic. Simply cut the first ream manually, and the cuts are stored as a program. A large central LC display indicates data in the selected language. Knife changes are easy, with a front adjustment. Built-in table light and optical cutting line indicator yields more precise cutting.

  • Features

    Easy push-button programming - stores up to 99 programs, 6464 cut steps

    Large central LC display - indicates data in the selected language

    Optical cutting line indicator & table light - for precision cutting

    Automatic programming - first manual cuts stored as program

    Repeat function - cut sizes can be repeated as needed

    Low noise levels - motor runs only during cutting operations

    Manual back guage positioning with electronic hand wheel

    Hydraulic knife drive and clamping

    Overload protection - for main motor and back guage drive

    Motor-powered back guage drive

    Easy knife change with front adjustment - tools included

    Hydraulic clamp pressure is adjustable for a variety of materials

    Non-corrosive closed table surface

    Machine self-diagnosis with error indication

  • Download

BAUM Cut 26.4N Network Integrated Cutter

PBSA pbProduction BAUM Cut 26.4N Network Integrated Cutter

The BAUM Cut 26.4N is a sturdy programmable cutter.

  • Overview

    The BAUM Cut 26.4N is a sturdy programmable cutter for integration into digital workflow. It has an 18.5” touch screen display, barcode reader, Compucut® and process visualisation.

    Barcode reading for automatic cutting program creation and loading of the assigned program via the Compucut® feature is all new. Minimal maintenance is required for the Baumcut 26.4N due to the use of novel materials.

    The ultra-smooth stainless table surface allows an easy handling of the material, even without air jets. The clamping pressure can be adjusted infinitely within a wide setting range for each material cut. Bright LEDs mark the cutting line, making it clearly visible for the operator.

    Operation of the BaumCut 26.4N is done via an ergonomically positioned 18.5” touch screen display. Recurring cutting sequences can be memorised with a memory capacity of 1998 programs. With the process visualisation, the handling of the material is displayed graphically and so the risk of errors is significantly downsized.

  • Features

    Compact and extremely sturdy frame

    Illuminated work surface with optical LED cutting line indicator

    Integrated operator guidance for knife changes

    Infinitely adjustable hydraulic clamping

    Memory capacity of 1998 programs (unlimited with ESPV Coumucut)

    False plate for pressure clamp accessed from front side

    Stainless steel table surface

  • Download

BAUM Cut 31.5E Programmable Cutter

PBSA pbProduction BAUM Cut 31.5E Programmable Cutter

Efficient, compact, and easy to operate.

  • Overview

    The BAUM Cut 31.5 programmable cutter is efficient, compact, and easy to operate, with minimal maintenance. This heavy-duty, fully-hydraulic cutter features easy push-button programming and stores up to 99 programs with 6464 cut steps.

    The BaumCut 31.5 offers high-productivity precision cutting with maximum safety in mind. Infrared safety beams, two hand timed cut release and covered rear table help ensure operator safety. Noise levels are kept to a minimum since the motor runs only during cutting operations.

    Programming is automatic. Simply cut the first ream manually, and the cuts are stored as a program. A large central LC display indicates data in the selected language. Knife changes are easy, with a front adjustment. Built-in table light and optical cutting line indicator yields more precise cutting.

  • Features

    Infrared safety beams are standard

    Two-hand, timed cut release with non-repeat device

    Rear table fully covered

    Permanent check of knife position

    Machine self-diagnosis with error indication

    Cover over foot pedal

  • Download

Paper Cutters and Guillotines Continues...













>